Downloads
Controller Software
The source for both the servers which run on the raspberri pi's in the robot components, and the external host machine are contained in the same repository.
The UI is web based an accessed at neufanged.com/control_panel
STLs for 3D printing
CAD Design Document
CAD for this project was done in Onshape
BOM
License
Stringman Pilot hardware designs (CAD document, STL files, Print Guide, and BOM) are released under the CERN-OHL-W 2.0 license with the following addendum:
The user assumes full responsibility for any injury, damage, or loss resulting from the installation or use of the hardware.